CUBE-100 BASS

Bass Amplifier

CUBE-100 BASS
Üretimden Kalkan

Looking for a portable, professional bass amp that will bring down the house? Roland’s new CUBE-100 BASS amp is compact enough for home practice, but has enough power to drive bass lines through band rehearsals and live gigs thanks to its 100 watts of amplification.

Compact and PowerfulThe

Cube-100 Bass has enough power to drive bass lines through band rehearsals and live gigs, thanks to its 100 rockin’ watts of amplification. And because of the compact design, you won’t be worn out carrying the amp back and forth between your home and gigs.

Renowned COSM Amps and More

The Cube-100 Bass has eight COSM amp models built in, including Octave Bass and the new “Super Flat.” These are all-original amp models from Roland R&D. Octave Bass is an octaver for producing the heaviest and lowest bass sounds. Super Flat responds accurately to a wide sound frequency, from the low-ends to the highs of the bass input, and you get a clean, clear tone that retains the natural sound quality of your bass. Its internal DSP is carefully tuned to avoid excessive coloration of the sound. It’s a great way to get the natural tone of upright basses with pickups.

Onboard DSP Effects

Once you’ve chosen the amp model of choice, route it through the Cube-100 Bass’s stellar digital effects, including EFX (Chorus/Flanger/T-Wah) and independent Delay/Reverb. Optional footswitches can be connected for controlling effects on/off.

Connect and Conquer

Connect directly to PA mixers through the Cube-100 Bass’s Balanced Out and Line Out jacks. With the Balanced Out jack, you can either send your direct bass signal or your customized bass sounds to PA mixers. You can also interface with larger external speaker cabinets through the built-in Ext Speaker jack. When the Cube-100 Bass is connected to an external speaker, the amp models and effects can still be accessed while gaining more power through the larger speakers. It also has a Tuner Out jack for convenient tuner connection. Lest we forget about the studio — the Cube-100 Bass’s Recording/Phones output jack and its variety of amp models make it a great choice for recording applications.

Rated Power Output
100 W
Nominal Input Level (1 kHz)
Input: -10 dBu / 1 M ohms
Speaker
30 cm + Tweeter (Coaxial, 2-way)
Controls
Power Switch,
Input: Pad Switch,
Compression: Compression Knob,
COSM Amplifier: Shape Switch, Type Knob (Super Flat, Flip Top, B Man, T.E, Bass360, Session, Concert810, Octave Bass), Gain Knob, Volume Knob,
Equalizer: Bass Knob, Low-Mid Knob, High-Mid Knob, Treble Knob,
EFX: EFX Knob (Chorus, Flanger, T-Wah),
Delay/Reverb: Delay/Reverb Knob,
Balanced Out: Select Switch (Pre, Post), Gnd Lift Switch (On, Off)
Indicators
POWER, PEAK, COMPRESSION, EFX, DELAY/REVERB
Connectors
INPUT Jack (1/4" phone type)
RECORDING OUT/PHONES Jack (Stereo 1/4" phone type)
FOOT SW Jack (EFX, DELAY/REVERB) (1/4" phone type)
EXT SPEAKER Jack (1/4" phone type)
LINE OUT Jack (1/4" phone type)
TUNER OUT Jack (1/4" phone type)
BALANCED OUT Jack (XLR type)
Power Supply
AC 117 V, AC 230 V, AC 240 V (50/60 Hz)
AC 220 V (60 Hz)
Power Consumption
28 W
Accessory
Owner’s Manual
Option
Foot Switch FS-5U (BOSS)
Size and Weight ( incl. casters )
Width
407 mm
16-1/16 inches
Depth
310 mm
12-1/4 inches
Height
469 mm
18-1/2 inches
Weight
17.0 kg
37 lbs. 8 oz.
* 0 dBu=0.775 Vrms
*The specifications are subject to change without notice.

İndirmeler

Destek

Roland ürünlerinizin kullanımı ile ilgili sorularınız varsa sıkça sorulan sorulara cevap bulabileceğiniz Ürün Veri Tabanı'nı ziyaret edebilirsiniz.
Ayrıca info@rolandtr.com adresinden müşteri ilişkileri departmanımıza ulaşarak ürün ile ilgili sorularınızı iletebilirsiniz.
Buna ek olarak, sitemizden Kullanım Kılavuzları ve Destek Dökümanlarını indirebilirsiniz.

Kullanım Kılavuzları

Destek Dökümanları