Destek

P-6 Sample Data / Patterns

When you perform a "Factory Reset," all Sample Data and Patterns stored in the P-6 will be deleted.
Please Import (Restore) it into the P-6 using the following procedure.
WHAT YOU NEED
  • P-6
  • USB cable
    * The import (restore) is carried out with the unit and the computer connected via USB.
    * You can use the USB cable that comes with the P-6.
  • Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0.
GETTING THE FILE
Please open/extract the downloaded "P6_SAMPLE_PATTERN.zip" file on your computer to get the "P6_SAMPLE_PATTERN" folder.
Please make sure you have unzipped the downloaded file.
PROCEDURE FOR THE Import (Restore)
Caution
  • You must not rename the extracted file.
  • Never turn off the P-6's power while the Import (Restore) is in progress. Otherwise the system program or the P-6 itself may be destroyed.

Import a Sample
Please import the Sample Data into your P-6 according to the following procedure.
 
  1. Connect the computer to the P-6's USB port by a USB cable.
  2. Hold down the [ SAMPLING ] button and turn on the power.
  3. Open the "P-6" drive icon on the computer.
  4. Copy (drag and drop) "BANK_A - BANK_D" from the "P6_SAMPLE_PATTERN" folder into the "IMPORT" folder in the "P-6" drive.
    * When copying, a confirmation screen may be displayed.
  5. After copying is finished, eject the USB drive on the computer.
    [ With Windows computer ]
    Right-click on the "P-6" icon in My Computer and execute "Eject."
    [ With Mac computer ]
    Drag the "P-6" icon to the Trush icon in the Dock.
  6. Press the [ KYBD ] button to start the import process.
    The message "donE" will appear on the display when the import process completes.
  7. Turn the P-6 power off.
  8. Hold down the [ SAMPLING ] button and turn on the power again.
  9. Open the "P-6" drive icon on the computer.
  10. Copy (drag and drop) "BANK_E - BANK_H" from the "P6_SAMPLE_PATTERN" folder into the "IMPORT" folder in the "P-6" drive.
    * When copying, a confirmation screen may be displayed.
  11. After copying is finished, eject the USB drive on the computer.
    [ With Windows computer ]
    Right-click on the "P-6" icon in My Computer and execute "Eject."
    [ With Mac computer ]
    Drag the "P-6" icon to the Trush icon in the Dock.
  12. Press the [ KYBD ] button to start the import process.
    The message "donE" will appear on the display when the import process completes.
  13. Turn the P-6 power off.

Restoring a Patterns
Please restore the Patterns into your P-6 according to the following procedure.
 
  1. Connect the computer to the P-6's USB port by a USB cable.
  2. Hold down the [ REC ] button and turn on the power.
  3. Open the "P-6" drive icon on the computer.
  4. Copy (drag and drop) "RESTORE" folder from the "P6_SAMPLE_PATTERN" folder into the "P-6" drive icon.
    * When copying, a confirmation screen may be displayed.
  5. After copying is finished, eject the USB drive on the computer.
    [ With Windows computer ]
    Right-click on the "P-6" icon in My Computer and execute "Eject."
    [ With Mac computer ]
    Drag the "P-6" icon to the Trush icon in the Dock.
  6. Press the [ KYBD ] button to start the restore process.
    The message "donE" will appear on the display when the restore process completes.
    * It may take about 5 minutes for the pattern to be restored.
    * You can check the progress by checking the light of the Step Buttons.
  7. Turn the P-6 power off.

Destek

Quick Links