Destek

Mobile UA System Update Ver.2.02

This is the latest version of operating system for the Mobile UA.

How to know the driver's version
Before you start, check the system program version of your Mobile UA.
  1. After connecting the Mobile UA to the computer, follow the procedure below to start "Device Setting Panel."
    Windows
    Open "Control Panel" and change the view to "Small icons," click the [UA-M10] icon.
    Mac
    Open the system preferences, click the [UA-M10] icon, click the [UA-M10] icon.
  2. The version is displayed at the bottom of the window.
  3. If the Ver.2 driver is not installed, then install the latest version of the driver.
* If this shows the latest version, there’s no need to update your Mobile UA.
 
How to know the Mobile UA's version
  1. After connecting the Mobile UA to the computer, follow the procedure below to start "Device Setting Panel."
    Windows
    Open "Control Panel" and change the view to "Small icons." click the [UA-M10] icon, and then click the device settings button.
    Mac
    Open the system preferences, click the [UA-M10] icon, and then click the device settings button.
  2. The current version is displayed at the bottom left of the window.
* If this shows the latest version, there’s no need to update your Mobile UA.
 
Update history
[ Ver.2.02 ]
[ Additional Functions ]
  • Two types of "Output Mode" settings were added.
    2 channel (A:phones, B:line out)
    The same sound is output from both the Headphone A jack and the Headphone B / LINE OUT jack. However, the volume can be adjusted only for the Headphone A jack.
    2 channel (A:Right, B:Left, balanced)
    Choose this setting if you're using headphones with a balanced connection. The Headphone A jack outputs the sound of the right channel, and the Headphone B / LINE OUT jack outputs the sound of the left channel.
  • An attenuator was added to the Headphones B/LINE OUT connector output for "Output Mode : 4 channel (A:phones, B:line out)."
 
What you will need to update your Mobile UA
  • Mobile UA
  • A personal computer which can run the SMF players ("UpdSMF")
  • USB Cable

Caution when performing the update
  • If you update on the normal mode of Mobile UA against the correct procedrue, this update data may destroy the system program.
  • Never power-off your Mobile UA while the update is in progress!
    If a power failure or similar accident occurs during the update process, the Mobile UA won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file
Please open/extract the downloaded "uam10_sys_v202.zip" file on your computer to get the update files named "m0000001.mid - m0000004.mid" in the "uam10_sys_v202" folder.
 
Procedure for the update
Follow the procedure shown below to install the unarchived system program in the Mobile UA.
* Be very sure never to turn off the power to the Mobile UA while the update is in progress.
 
  1. Install Mobile UA Driver Ver.2.
    * If Mobile UA Driver Ver.1 is installed, first uninstall the version 1 driver, and then install the version 2 driver.
    * If you're using Windows 10, then depending on factors such as Internet connection status, automatic driver installation (update) might not be performed. In such cases, use the procedure described below to install the driver.
    1. Use a USB cable to connect the Mobile UA to your computer.
    2. Right-click the start button and then click "Device Manager".
    3. In the View menu, click "Devices by type".
    4. Click "Sound, video and game controllers" or "Other devices" to display the UA-M10 device.
    5. When the UA-M10 device appears, right-click it, and then select "Update Driver Software".
    6. Select "Search automatically for updated driver software".
      Your PC starts searching for the driver, and the driver is installed automatically.

      The installation is completed if the "Windows has successfully updated your driver software" message is displayed. Click "Close".
      If the "System Settings Change" dialog box appears, click [Yes] to restart Windows.
       
  2. Hold down the [ - ] button and connect the USB cable.
    Within 1 second, release the [-] button and press the [ + ] button.
    Verify that the level meter lights up while slowly moving from left to right.
    * If the level meter goes dark, repeat the procedure from step 2.
  3. Double-click "UpdSMF" displayed on the screen to start the UpdSMF.
  4. Set MIDI Out Device to UA-M10 CTRL.
  5. Click [ Path ] (click [ Select... ] for Mac) on "UpdSMF" and specify the location where the update file (m0000001.mid - m0000004.mid) is from SMF Path (SMF Folder for Mac). Then, click the [ OK ] button.
  6. Click [ Scan SMF ] (unnecessary for Mac) to check that the update file (m0000001.mid - m0000004.mid) is displayed in the file list.
  7. Click Send.
    Sending of the update program starts.
  8. When the Mobile UA's entire Level/Volume indicator blinks up, the update is complete.
    * The update is not complete when UpdSMF displays the message "Send SMF/Complete."
  9. Click [ OK ] on the Send SMF/Complete dialog box (the Complete Update dialog box for Mac) of "UpdSMF".
  10. Click [ Exit ] (click [ Quit ] for Mac) of the "UpdSMF" to exit "UpdSMF".
  11. Disconnect the USB cable to end the update.
  12. Please verify the version number "2.02" with the procedure described in "How to know the version" part of this document.
 

Destek

Quick Links